2010 Mazda 3 Transmission rebuild

2010 MAZDA 3
90,000 MILES • 2.5L • 4 CYL • FWD • AUTOMATIC
Avatar
HCMATHIS22
  • MEMBER
  • 2 POSTS
Hello. I have a mazda 3 with an electronic automatic transmission with electronic clutch less manual. I was curious about buying a shift kit and or new transmission valve body to upgrade the stock trans. With the intention of possibly adding a turbocharger down the road, what would be my best bet along the lines of upgrading the trans?

Thanks for your time,
Holden Mathis
Nov 19, 2015 at 12:35 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
first thing see if it can be you need to beef up with more clutches and maybe valve body mods
check the magazines for imports for that kind of stuff.
Nov 20, 2015 at 7:39 AM
Avatar
HCMATHIS22
  • MEMBER
  • 2 POSTS
Thank you very much! How would I go about finding which replacement clutch parts would fit my car's transmission? Online I'm seeing several different Hughes Performance Clutch Packs, ranging in prices from $8 to over $100. I've done a little searching around and can't find a part name or number for my cars trans.

Thanks again,
Holden
Nov 20, 2015 at 8:07 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
there may be a tag on it someplace that will say either F55A-EL orAW6A-EL for identification . you will need to know which trans you have then clutch paks may be clutchs and plates and or drums so you need to find out what you are looking for . call the manufacturers they can probably help you more than I can.
Nov 20, 2015 at 8:20 AM