2010 FORD FUSION
72,310 MILES
Avatar
FUSION2010
  • MEMBER
  • 5 POSTS
Hi my rear passenger door power lock doesn't work with door closed but will with the door open when it does work what would cause it?
Mar 28, 2013 at 2:55 PM
Advertisement
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
That could be a broken wire in the door jam or an actuator just just isn't strong enough. It depends if you can hear it trying when the door is closed.
Mar 28, 2013 at 3:31 PM
Avatar
FUSION2010
  • MEMBER
  • 5 POSTS
It work's every once in awhile with door closed but mainly with it open but it doesn't work at all most of the time I can't figure out to remove the assembly that holds the speaker and window, regulator and motor.
Mar 31, 2013 at 6:42 AM
Advertisement
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
I don't know why you would need to. You have an electrical problem that needs to be troubleshooted.
Mar 31, 2013 at 11:03 AM
Avatar
FUSION2010
  • MEMBER
  • 5 POSTS
how would I test it with a multimeter I've never really used one?
Mar 31, 2013 at 12:46 PM
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
This will require extensive electrical knowledge to follow a complicated wiring diagram. This is not something that you are going to learn how to do on the Internet, especially with an intermittent problem..
Mar 31, 2013 at 1:00 PM
Avatar
FUSION2010
  • MEMBER
  • 5 POSTS
well I can't afford to pay the dealership thousands or someone hundreds that's why I try to do everything myself I've a lot of mechanical work in the past but not electrical
Mar 31, 2013 at 1:02 PM
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
OK, here ya go http://i1198.photobucket.com/albums/aa448/Wrenchtech/159263371.jpg
Mar 31, 2013 at 1:07 PM
Avatar
FUSION2010
  • MEMBER
  • 5 POSTS
don't I have to take the whole assembly out to get to the actuator? Looks like I'll have to take out the window regulator assembly before I can remove it
Mar 31, 2013 at 1:09 PM