I need to replace the BCM can you help?

2010 CHEVROLET EQUINOX
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
the battery keeps draining nearly everday.i realise there seems to be a tsb concerning the BCM .my problem is that i live in the caribbean and have no way of getting the bcm flashed or programmed with upgrades at chevy dealer because there is none close to me.what other option do i have to get this done???
Mar 19, 2013 at 10:10 AM
Advertisement
Avatar
DANNY L
  • CERTIFIED EXPERT
  • 5,648 POSTS
Hello, I'm Danny.

Unfortunately, You will have to purchase a new BCM or have it re-flashed by someone close to you how is capable of performing this. I've attached picture steps below on how to remove and replace the BCM on your vehicle including the TSB notice showing the fault. Hope this helps and thanks for using 2CarPros.
May 15, 2021 at 3:39 AM
Avatar
DANIEL GUZMAN
  • MEMBER
  • 1 POST
Hi, our vehicle was working perfectly last night. This morning, we woke up to several issues:
- Front wipers are not working
- Horn is not working.
- Only the rear turn lights work, no front turn lights (it makes this fast clicking sound as if one of the bulbs was out).
- AC is not working, it is not blowing cold air.
- Radiator fans are not working, so we cannot drive it like this.
- The truck does start perfectly though.

I checked the battery with a multi-meter and it reads 12.7 volts. Disconnected it for twenty minutes, then reconnected it and the issues persist. BCM replacement instructions?
Jun 14, 2021 at 6:58 PM (Merged)
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Here is how you can replace the BCM in the diagrams below. Check out the diagrams (Below). Let us know what happens and please upload pictures or videos of the problem.
Jun 14, 2021 at 6:58 PM (Merged)