starting and vibrating

2009 SUZUKI ALTO
25,000 MILES • 4 CYL • FWD • MANUAL
Avatar
JANMJUNIOR
  • MEMBER
  • 1 POST
I hv suzuki alto vxr assembled in pakistan, which is 1000cc with f10a soch engine mounted. When i go to early in the morning for start the car, as i ignited the key car starts but after 3 to 5 seconds engine off. on the next attempt engine misfire and don't starts only crancking after pushing the accelator pedal and clutch pedals it starts but as i push the accelator pedal its again stop, after it the engine starts but heavily vibrate the whole engine for a little time for engine in working temptratur. i hv no any manual for this car, n hv no some possible dignosis tools. plz me to fine out the problem of this.
thanks
Mar 21, 2011 at 3:08 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Check fuel pump pressure. There are directions and a video on our home page under the DIY section. Next, check to make sure the idle air control valve is good.

I noticed that the vehicle is an 09 with only 25K on it. It should be under the manufacturer's warranty. For sure, any immisions components are covered at this point. Have you had a dealer check it? Most likely, the problem will be covered under your emissions warranty. Have a dealer look at it and let me know what you find.
Jun 21, 2011 at 3:49 AM