Hi, would like to know how to set the timing on a 2008 Pathfinder? Thanks

2008 NISSAN PATHFINDER
70,000 MILES
Avatar
MICHAELPELLAPOWELL
  • MEMBER
  • 3 POSTS
HI,

how do you set the timing on a 2008 Pathfinder before removing the head?
Thanks
Mick
Sep 9, 2012 at 1:21 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
when you remove the front covers and expose the gears. line up the marks and paint them into the covers.

why are you removing the heads.

Roy
Sep 9, 2012 at 2:24 AM
Avatar
MICHAELPELLAPOWELL
  • MEMBER
  • 3 POSTS
It's done a head gasket just want to c if heads cracked or not. Is it trig I line the bottom gear with tdc the other two at top will line up automatically? And does it have to be in nuatral or is park ok coz it is locked in park some electronic thing to not let u shift without car running I guess?! There is a circle indent on the gear do I just line that up with the groove? I'm new to this if u can't tell!
Sep 9, 2012 at 4:08 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
the head will have to be sent out to be pressure tested to verify if it is cracked or not.

Roy
Sep 9, 2012 at 4:35 AM
Avatar
MICHAELPELLAPOWELL
  • MEMBER
  • 3 POSTS
Ye i realize that just need to know bout timing and does it have to be in neautral etc
Sep 9, 2012 at 5:07 AM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
It is not necessary to be in neutral. The transmission being locked up does not affect the engine.

To line up the marks, you might need to make anything between 1 up to 40 revolutions of the crankshaft.

Which engine do you have?
Sep 9, 2012 at 11:03 AM