Tail lights Not Working

2008 FORD TAURUS
AUTOMATIC
Avatar
VLADICORP
  • MEMBER
  • 1 POST
Hello, I have a problem with the Rear Lights of the car. The both rear lights just stop working when the lights are switched on. But the the brake lights are working. So my question is: Is the brake lights bulb is the same with the normal lights or it is different so I will get to know if I have to change the bulbs or it is a bigger problem.
Jun 22, 2015 at 7:57 AM
Advertisement
Avatar
RACEFAN966
  • CERTIFIED EXPERT
  • 5,029 POSTS
Hello.

There is a tail light relay that needs to be checked here is a guide to help you with the tail light wiring diagrams so you can see how it works and relay location below.

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

They call the relay a "reversing lamp" relay. Here are the fuse panels.

Check out the diagrams (Below). Please let us know what you find.



Jun 22, 2015 at 8:37 AM
Avatar
TWILS
  • MEMBER
  • 0 POST
It was the relay cost me $23.00 :)
Dec 18, 2018 at 6:11 PM
Advertisement
Avatar
RICKY12342682
  • MEMBER
  • 3 POSTS
I have a ford taurus 2000, i recently changed the break switch because my break light would not turn off, Now the issue that my tail lights are not working... Taurus does not have a fuze for the tail light i checked the bulb and looks fine... turn signals and break lights turn on what should i do?
Nov 26, 2019 at 7:57 PM (Merged)
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Check and test the park relay and the multifunction switch
Nov 26, 2019 at 7:57 PM (Merged)
Avatar
RICKY12342682
  • MEMBER
  • 3 POSTS
i check the park relay and the multifunction switch still not a thing of light all wires are connected in no sight of loose connection...
Nov 26, 2019 at 7:57 PM (Merged)
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
If the switch and relay tested good the running light circuit is open or shorted to ground after it leaves the switch
Nov 26, 2019 at 7:57 PM (Merged)
Avatar
RICKY12342682
  • MEMBER
  • 3 POSTS
the ground is in the rear wiring harness just follow the wiring you will find it on the drivers side
Nov 26, 2019 at 7:57 PM (Merged)