how do you change the fuel filter on a 2008 escape
Dec 27, 2010 at 7:05 PM
how fuel fiter on a 2008 escape
2008 FORD ESCAPE
WVALENTINE
- MEMBER
- 1 POST
- FOLLOW
Advertisement
ON OUR 2003,
YOU MUST REMOVE A PROTECTIVE BRACKET AROUND IT (IT IS LOCATED ON THE DRIVERS SIDE FRAME, FOLLOW FUEL LINES TO IT)
THEN YOU PUSH OUT 2 FORKED PLASTIC CLIPS OFF OF EACH END
COVER UNIT WITH A RAG, OR YOU WILL GET "FUEL SOAKED" BECAUSE THE SYSTEM STILL MAY HAVE PRESSURE ON IT
NEVER DO THIS ALONE!!! ALWAYS HAVE A "STRONG" (NOT A RUNAWAY!) PAL ON STAND-BY WITH A FIRE EXTINGUISHER HANDY!!!
OBSERVE THE CONNECTIONS WELL AND LOOK FOR A DIRECTIONAL ARROW OR "IN and "OUT"---PRIOR TO REMOVING THE CLIPS----IT GOES BACK IN REVERSE ORDER--INSURE DIRECTION IS CORRECT AND CLIPS ARE FULLY LOCKED IN.
IT IS A REALLY EZ TASK!
IT MAY TAKE A FEW "ON--OFFs" WITH YOUR KEY TO PRIME THE SYSTEM BACK UP.
REMEMBER THIS WAS A 2003 ESCAPE!--YOURS MAY NOT BE EXACTLY THE SAME!
A REPAIR MANUAL WOULD SERVE YOU WELL FOR THINGS LIKE THIS!
LET ME KNOW HOW IT TURNS OUT!
THE MEDIC
YOU MUST REMOVE A PROTECTIVE BRACKET AROUND IT (IT IS LOCATED ON THE DRIVERS SIDE FRAME, FOLLOW FUEL LINES TO IT)
THEN YOU PUSH OUT 2 FORKED PLASTIC CLIPS OFF OF EACH END
COVER UNIT WITH A RAG, OR YOU WILL GET "FUEL SOAKED" BECAUSE THE SYSTEM STILL MAY HAVE PRESSURE ON IT
NEVER DO THIS ALONE!!! ALWAYS HAVE A "STRONG" (NOT A RUNAWAY!) PAL ON STAND-BY WITH A FIRE EXTINGUISHER HANDY!!!
OBSERVE THE CONNECTIONS WELL AND LOOK FOR A DIRECTIONAL ARROW OR "IN and "OUT"---PRIOR TO REMOVING THE CLIPS----IT GOES BACK IN REVERSE ORDER--INSURE DIRECTION IS CORRECT AND CLIPS ARE FULLY LOCKED IN.
IT IS A REALLY EZ TASK!
IT MAY TAKE A FEW "ON--OFFs" WITH YOUR KEY TO PRIME THE SYSTEM BACK UP.
REMEMBER THIS WAS A 2003 ESCAPE!--YOURS MAY NOT BE EXACTLY THE SAME!
A REPAIR MANUAL WOULD SERVE YOU WELL FOR THINGS LIKE THIS!
LET ME KNOW HOW IT TURNS OUT!
THE MEDIC
Dec 27, 2010 at 7:23 PM