2008 Dodge Magnum dodge magnum

1-2-3-4-5-6

do you have a picture in what order they fall in

Let me know if this helps.

they told me that the thrid ignition coil need to be change i change the thrid one and the check engine light is still on and i change all the plung to




coil on plug

5 6
3 4
1 2

that was the order they said it was

Okay, are 1 and 2 at the front of the engine or 5 and 6? Also, does the engine run at all?

1 and 2 is at the front when i first crank the car it ok and go somewhere and cut it then i crank it up the engine light come on and flash and it skipper

I need you to scan the computer to let me know the trouble code that is coming up. If it is flashing, there is a misfire. I need to know the code to identify the cylinder so we can try a few things.

Also, if I understand correctly, it runs good until you shut it. When you restart it is when the light flashes and the engine misfires. Correct? If so, if you shut it again, does it run properly? Does it only do this after the engine is warm?

Let me know the code. I would like to identify the cylinder and have you check the plug to see if it is wet when it happens as well as a few other things. For example, is the coil firing at the affected cylinder or if the plug is dry, are we losing power to the injector...

Hang in there. We will figure it out. Also, most parts stores will scan it for free for you.