2008 Chrysler Sebring car doesnt charge

2008 CHRYSLER SEBRING
84,000 MILES
Avatar
ESEQUIELMACIAS
  • MEMBER
  • 2 POSTS
I changed the alternator and battery on my car and now the car drained the battery i charged the battery and the car died out slowly the a/c would stop working the radio turned off and all the lights start dimming out when i got the alternator to charge the car did not want to accelerate i fixed that problem the car ran good yesterday afternoon and today i was on the highway and my warning lights came on my car lost power and it wouldn't shift gear and then it wouldn't accelerate and now it completely died please help
Jun 9, 2013 at 2:40 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
charge battery first and then check fusible link in pic, either a test light or volt meter teste both sides for same voltage. if not same replace it they are available at auto parts.
Image (Click to enlarge)
Attached Media
Jun 9, 2013 at 4:22 PM
Avatar
ESEQUIELMACIAS
  • MEMBER
  • 2 POSTS
Ok i just replaced that line you told me and it started charging but the abs, the break light and a red lightning bolt keep comin on i hookd up the obd on and it came up with these codes p1607, p0562, p0700, p1128, u1110, u1120, u1412, u1403 is that somethinh i can fix and what do you recommend to do
Jun 14, 2013 at 9:29 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
with all those codes make sure you battery is in good condition and load test as well. then have apro look at this as you have several abs codes as well as engine performance codes.
Jun 15, 2013 at 11:36 AM
Avatar
MM3CIPOLLETTI
  • MEMBER
  • 1 POST
What was the solution to your problem? I have a 2007 Sebring and I got the same set of Ucodes. No Pcodes though and the local Chrysler dealership won't tell me what the Ucodes mean
Sep 18, 2014 at 2:58 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
repost your question
Sep 18, 2014 at 3:31 PM