removing passenger side front seat belt?

Hello,


Remove the seat belt height adjuster Cover.
Remove the center pillar trim and Center Pillar Lower Trim Panel Replacement
Front Seat Shoulder Belt Anchor Plate Bolt

Tip: Disconnect the electrical connector by using a small pick to release the safety to undo.

Tighten: 43 N.m (32 lb ft) Shoulder Belt Guide Retainer
Front Seat Retractor Bolt

Tighten: 43 N.m (32 lb ft) Front Seat Belt Retractor

(See the diagram below)

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken

Thanks you got the seat belt done and new one installed and car was a salvage and last things that need done for inspection was install new airbag and seat belts need removed and sent to be rebuilt that i figured out have drivers side out but there is a sensor on passenger side that i cannot see any way to remove so it can be replaced.

Here is a good guide showing what it takes to remove an air bag

https://www.2carpros.com/articles/air-bag-removal-steering-wheel

Check out the diagrams (Below)

Please let us know if you need anything else to get the problem fixed.

Cheers

great guide, thanks I love this site!

You're welcome.