Spark plugs replacement

2008 CHEVROLET EQUINOX
126,000 MILES
Avatar
SKMACK
  • MEMBER
  • 1 POST
My Equinox Sport has 126000 Kim's on it and I want to change out the spark plugs. Can you please out line the process for changing the spark plugs in my 2008 Equinox "Sport" 3.6 ltr. Engine.

It has aluminum heads so I know to only re& re the plugs when engine is cold.

Thanks,,
Skm
Jun 20, 2013 at 5:35 PM
Advertisement
Avatar
FREEMBA
  • CERTIFIED EXPERT
  • 1,152 POSTS
To remove the spark plug wires twist the spark plug wires boot as you pull it from the spark plug.

Remove the engine appearance cover.

Removal & Installation
1. Disconnect the spark plug wires from the spark plugs.
2. Remove the spark plugs from the cylinder head.
To install:
Installing plugs with the wrong gap can cause poor engine performance and may even damage the engine.
1. Gap the spark plugs to the 0.060 inch.
2. Install the spark plugs to the cylinder head. Tighten the plugs to 11 ft. lbs. (15 Nm).
3. Install the spark plug wires to the spark plugs.

Completely finish the replacement process n one spark plug before moving to the next, in order to avoid getting the wires mixed up.




Jun 20, 2013 at 7:07 PM