Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Image (Click to enlarge)
Nov 7, 2012 at 6:48 AM
JONNYB88
MEMBER
2 POSTS
Thanks guys that's what I needed
Nov 7, 2012 at 9:16 PM
Advertisement
TERRYWAYNE2
MEMBER
1 POST
Need firing order diagram front and side view. It is a 3.8 xp Grand Prix. I think I crossed wires.
Mar 8, 2021 at 6:11 PM
(Merged)
JACOBANDNICKOLAS
CERTIFIED EXPERT
110,175 POSTS
Here is the engine spark plug firing order. Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed................................
Cheers
Image (Click to enlarge)
Mar 8, 2021 at 6:11 PM
(Merged)
REDNECK0819
MEMBER
8 POSTS
Is there a difference in the firing order of the 3800 between a VIN:K and my old ladies that is a VIN:2? the coil packs from top to bottom run 6-3-2-5-4-1. just trying to make sure they didn't get cross wired somehow.. thank you
Mar 8, 2021 at 6:11 PM
(Merged)
DANNY L
CERTIFIED EXPERT
5,648 POSTS
Hello, I'm Danny.
Yes, both the vin K and vin 2 firing order on the 3.8L motor is exactly the same. I've attached pictures below. Hope this helps and thanks for using 2CarPros.
Images (Click to enlarge)
Mar 8, 2021 at 6:11 PM
(Merged)
CIRACING13
MEMBER
1 POST
i need the firing order diagram for the 3.1L v6
Mar 8, 2021 at 6:11 PM
(Merged)
JDL
CERTIFIED EXPERT
16,098 POSTS
Hi, welcome to the forum. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Mar 8, 2021 at 6:11 PM
(Merged)
SARAH&GREG
MEMBER
1 POST
what is the fireing order on a pontiac grand prix gtp? it has the 3.4 dohc motor. my car starts up an revse up an shuts off.
Mar 8, 2021 at 6:11 PM
(Merged)
JDL
CERTIFIED EXPERT
16,098 POSTS
You treat a start and die the same as a no start. You try to out what your losing. Spark-- fuel, don't guess about the fuel, use a gage and check pressure, key on and then after it dies. any codes?
Mar 8, 2021 at 6:11 PM
(Merged)
SHOOTOUTFAN
MEMBER
1 POST
whats is the location of the number 1 clynder and the firing order and the location each wire goes on the distributer?