how do i keep my headlights on my jeep liberty from burning out once a week?
Dec 6, 2010 at 1:04 AM
Advertisement
HMAC300
CERTIFIED EXPERT
48,601 POSTS
don't buy the chea p chinese bulbs that alot of auto parts stores carry for one. buy a quality one, if it's delco and made in Mexico it will still be made to delco's specs. also don't touch the bulb with your hand or fingers, use gloves of some type so the oil on your hands won't touch them. Also check your grounds to the headlights, it's the black wire, make sure they are tight and clean.
Dec 6, 2010 at 1:06 AM
MHPAUTOS
CERTIFIED EXPERT
31,937 POSTS
I would be checking the alternator charge rate, i would say that the voltage reg is faulty and the charge rate is sky high causing this problem, do the lights go very bright with higher engine revs?
mark (mhpautos)
Dec 6, 2010 at 1:06 AM
Advertisement
CARADIODOC
CERTIFIED EXPERT
34,307 POSTS
Also be sure there's no water trapped in the housings that can splash onto the bulbs, and the housings are not loose and vibrating.
If you see goldfish swimming in the housings, drill a small drain hole in the bottoms!
And the comment about fingerprint oil is very true. Don't touch the glass.