Check engine light after brake job.

2007 JEEP GRAND CHEROKEE
90,000 MILES
Avatar
MATTSCARBRO
  • MEMBER
  • 4 POSTS
I just changed the front rotors & pads as well as the rear pads on my wife's jeep. During the first drive, a check engine light came on. It was my first time working on it but it was pretty straight forward unless I missed something. Any ideas as to what could cause this?
Jun 11, 2012 at 1:46 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
The first thing you need to do is take it to a auto parts store like auto zone and have them scan the computer for codes.Post the exact code numbers not code descriptions.Thats are starting point.
Jun 11, 2012 at 1:52 AM
Avatar
MATTSCARBRO
  • MEMBER
  • 4 POSTS
po730 is the code its throwing. Autozone didn't even have a description for it.
Jun 11, 2012 at 2:22 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
That code is for incorrect gear ratio.Do you have abs?
Jun 11, 2012 at 2:42 AM
Avatar
MATTSCARBRO
  • MEMBER
  • 4 POSTS
Yes it does.
Jun 11, 2012 at 3:00 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
I would check all your abs wheel speed harnesses for being damaged from the brake job that makes the most sense.Let me know what you find.
Jun 11, 2012 at 3:10 AM
Avatar
MATTSCARBRO
  • MEMBER
  • 4 POSTS
Well autozone cleared the CEL and my wife drove the car all day today and it hasn't come back on. It could be a freak incident but if it comes on again I'll let you know.
Jun 12, 2012 at 1:15 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Anything is possible keep me posted on the light and code status.
Jun 12, 2012 at 1:26 AM