I just replaced the rear brake pads and rotors on my 2007 4x4 Dodge Ram quad cab.
Before lowering the vehicle I notice a small abount of laqteral play in the drive axle. Gripping the hub it would move in an out slightly. There was no play up and down as if testing the bearings. After pumping the brakes and seating the pads the play was minimized but still a slight amount of play. Is this normal?
Before lowering the vehicle I notice a small abount of laqteral play in the drive axle. Gripping the hub it would move in an out slightly. There was no play up and down as if testing the bearings. After pumping the brakes and seating the pads the play was minimized but still a slight amount of play. Is this normal?
Apr 12, 2012 at 11:42 PM