2007 Dodge Charger oil pan gasket removal

Do you mean the bolt is turning at the top? Are you able to get anything in there to stop it?

I tried putting some small pliers n sum small channel locks but I can't get it.....I'm trying 2 get it in between the motor n oil pan ....it's the 2 back guide bolts.....I'm so frustrated I got like 4 days n still can't get it

Is there any way you could upload a pic for me to see what you are dealing with?

Thnx I've removed it.....but now I got a bigger problem guys? This helper of mine messed up the rear main Seal block now I need 2 remove that cuz the 2 guide bolts broke ....the part is 80 bucks but I need 2 know how to replace it.?? Do I need to take out the motor or drop the transmission? ????

If the rear main oil seal is damaged, you have to separate the engine and transmission. It has a 1 piece seal and can't be installed while the two components are together. I would think removing the transmission would be quicker and easier than the engine.

Thnx ,...ur the 5th 1 that says transmission....!!! So transmission it is

Good luck. Let me know if I can help.

Joe

After thought... When you reinstall the trans, check, check, and then recheck to make sure ALL WIRING it properly routed and not going to get pinched together between the engine and trans, or anything else. Shorting the PCM or TCM can be an expensive and frustrating mistake.

Joe do u got any pics of the steps of dropping the transmission or anything that can help me out ?

I just checked my online manual. They provide pics for transmission components, but not removal. You may want to get a good service manual at a local parts store that has pics and steps to remove it.