Drivers Power Seat Switch

eat Switch Replacement - Power

Removal Procedure

Remove the outer trim panel from the front seat cushion.



Use a small flat-bladed tool to release the retainers which hold the power seat switch to the outer trim panel.



Remove the power seat switch from the outer trim panel.



Remove the power seat switch harness from the front seat support.



Disconnect the electrical connector from the power seat switch.
Remove the power seat switch.

Installation Procedure



Connect the electrical connector to the power seat switch.



Install the power seat switch to the outer trim panel, pressing the switch into place until fully seated.




Important: The power front seat switch harness must be in the proper position for the proper installation of the outer seat cushion trim panel.

Connect the power seat switch harness to the front seat support.
Install the outer trim panel to the front seat cushion.


I attached a few pictures below to help out