2006 scion tc rear wheel bearing

REMOVAL
HINT:
• Use the same procedures for the RH and LH side.
• The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL

2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY

a. Remove the 2 bolts and disconnect the rear disc brake cylinder assembly.
NOTE:
Use a string or equivalent to keep the brake caliper from
hanging down by the flexible hose.

3. REMOVE REAR DISC

4. Remove the cotter pin and nut.

5. Remove the 4 bolts, nut, hub and bearing assembly and back plate assembly from the rear axle carrier.



NOTE:
• Neither abnormal drag nor rattle exists during the
rotation.
• There should be no cracks, grease leakage or
deformation on the dust cover.