2006 PONTIAC MONTANA
61,000 MILES
Avatar
JKLITZGRASS
  • MEMBER
  • 4 POSTS
I have no front heat in my 2006 Pontiac Montana van, the blower blows only cold air. I have replaced 3 actuators under the passager side. Do you have a diagram for the remaining actuators for my vehicle. Also, wondering if the problem is something else, ex: heater hoses. The block gets hot, but no heat comes into the front of the van, only cold air. Thank you.
Nov 5, 2012 at 4:31 PM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,855 POSTS
It does sounds like you have a blend door actuator that has failed here is a guide to help you see what you are in for when doing the job.

https://www.2carpros.com/articles/replace-blend-door-motor

Here is the location for your car (below)

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken
Images (Click to enlarge)
Attached Media
Attached Media
Nov 5, 2012 at 5:33 PM
Avatar
JKLITZGRASS
  • MEMBER
  • 4 POSTS
Both heater hoses are hot so I think it is the temperature blend door actuator like you said.
Nov 5, 2012 at 5:37 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
So did you see if the blend door is moving?
Nov 6, 2012 at 8:57 PM
Avatar
JKLITZGRASS
  • MEMBER
  • 4 POSTS
one door further into the under dash was stuck, when I moved that, heat started to come in....but stopped again. Not to sure how to replace that actuator, and how many more actuators there are to check. Can you possibly supply me with an image of all the actuators, where they are and what I need to get them replaced. Like I said, I have replaced 3 that were under the passage side panel, when I replaced these, the clicking stopped, and heat! Thanks so much for all your help!!
Nov 7, 2012 at 11:50 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,855 POSTS
Good to hear, please use 2CarPros anytime we are here to help.

Cheers, Ken
Jan 29, 2018 at 6:09 PM