2006 Chrysler PT Cruiser p0882

2006 CHRYSLER PT CRUISER
95,000 MILES • 2.4L • FWD • AUTOMATIC
Avatar
ZEMORZEMOR
  • MEMBER
  • 486 POSTS
i have a code p0882 . i checked the wiring diagram and the procedure to resolve the problem. the manual says to check the T15 circuit for open or shorted to ground . the circuit is not shorted or open so now i have two more option either the TIPM or the computer is bad how can i verify it ?
Jul 19, 2015 at 4:41 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
check to see if there are any tpim codes
it still can be pcm though
Jul 22, 2015 at 12:17 PM
Avatar
ZEMORZEMOR
  • MEMBER
  • 486 POSTS
there is no tipm codes. also i did PCM voltage drop test .the ground circuits was between 0.01v to 0.05v drop however the power side was 250mv drop is it excessive drop?
Sep 9, 2015 at 8:20 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
if no tpim codes and no short or open in trans control circuit then it may be the pcm or bad connections . try testing by wiggling wires also. I've never done a drop test so can't make a statement on that.
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Sep 10, 2015 at 6:15 AM
Avatar
ZEMORZEMOR
  • MEMBER
  • 486 POSTS
yesterday i had another code p0562 low system voltage how can i troubleshoot it
Sep 11, 2015 at 6:39 AM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
562 is low battery voltage, check for condition including load test and see if it's charging. may be a fusible link to alternator. most places check for free
Sep 11, 2015 at 7:09 AM