van will not crank over

2006 CHEVROLET UPLANDER
173,500 MILES • 3.5L • V6 • FWD • AUTOMATIC
Avatar
EAGLEMAN12
  • MEMBER
  • 5 POSTS
I installed a new battery and now the van will not start. interior lights come on, the radio works,the fuel gauge does not work and the headlights and horn do not work. When I try to start it nothing happens, it does not even make a clicking sound. To remove the old battery I had to move a bar out of the way and I had to move the fuse box out of the way which is above the battery, so that I could remove the battery. In order to move the fuse box out of the way I had to take the cover off and then remove the top section that the fuses are plugged into, so that I could remove the nuts from the mounting studs to move the fuse box out of the way
Aug 25, 2015 at 12:15 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
try resetting security system one of the two ways shown in pics and follow this guide

https://www.2carpros.com/articles/how-to-reset-a-security-system

Check out the diagrams (Below). Please let us know what happens.
Aug 25, 2015 at 12:23 PM
Avatar
EAGLEMAN12
  • MEMBER
  • 5 POSTS
number 3 says to:
observe the security telltale
what is the security telltale?
Aug 25, 2015 at 2:04 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
That is the security light, If you have another key try that as the transponder in the key may be bad. Also lets recheck the battery cables here is a guide to help

https://www.2carpros.com/articles/everything-goes-dead-when-engine-is-cranked

Please run down this guide and report back.
Aug 25, 2015 at 3:17 PM
Avatar
EAGLEMAN12
  • MEMBER
  • 5 POSTS
You nailed it, I checked out the guide and cleaned and tightened the battery cables all fixed! I love this site.
Aug 26, 2015 at 7:38 AM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
Good to hear, please use 2CarPros anytime we are here to help.
Aug 26, 2015 at 7:56 AM