2006 chevy ssr

2006 CHEVROLET SSR
100,000 MILES
Avatar
SEAN03
  • MEMBER
  • 523 POSTS
I installed a new throttle body and gasket last night on my dads Chevy SSR. The last one I was having problems out of it. I ran it last night had all 400hp it was fast almost like new again. It was a cool night. I shut it off a bunch of times last night and it started. I went to start it at 5:15pm today and it would not start. Here are the codes I got p0443 p1516 N/A another N/A p0443 and p0689. The N/A codde will not erase from the system the p0443 is another hard one to erase. Please help me. Thanks.
Jun 27, 2012 at 9:29 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
stop erasing as it does nothing. the tech checking the car needs the freeze frame data to see the readings when the failure happened.

Roy
Jun 28, 2012 at 12:54 AM
Avatar
SEAN03
  • MEMBER
  • 523 POSTS
It is weird. The car wont start if the weather is hot outside. I started it tonight started fine no problems. It shuts off fine and starts right back up. Their is also no trouble codes at all. could the canister purge valve solenoid be causing this. Also why would the P1516 CHEVROLET - Throttle Actuator Control Module Throttle Actuator Position Performance come on. I just replaced the throttle body and the gasket.I would rather not have to take it to the dealer if I dont have to. Thanks.
Jun 28, 2012 at 1:00 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
did you replace replace the pedal sensor/module as well??

roy
Jun 28, 2012 at 1:02 AM
Avatar
SEAN03
  • MEMBER
  • 523 POSTS
No I didn't was I suppose to.
Jun 28, 2012 at 1:43 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
thats because you are not a tech. in most cases, the throttle body and pedal sensors are replaced together.

roy
Jun 28, 2012 at 1:47 AM
Avatar
SEAN03
  • MEMBER
  • 523 POSTS
Would all the symptoms that I am having be related to that. I talked to someone on here and told him I was going to replace the throttle body because I was having problems. He didn't tell me I need to change that to. Thanks.
Jun 28, 2012 at 1:50 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
good luck
Jun 28, 2012 at 2:09 AM