Front blower motor works, just not getting any power to it, have power to speed switch but I lose it when I turn the switch on, all other wires are ground, all wires at resistor are ground, no power. I replaced fan speed switch, it didn't fix the problem. I installed a simple toggle switch, ran hot wire from fuse box, through 30 amp fuse, switch, than to motor. I grounded the motor using the same factory wire harness. Blower motor works, and I can even change the speed using the fan speed switch. I only found two relays under hood for blower motors, 1 for the front and 1 for the rear, both are good, all fuses are good as well, maybe there's a relay, that's hidden? Please, any help is greatly appreciated, thanks.
Dec 2, 2011 at 5:50 PM
