Not going into gear?

2005 NISSAN PATHFINDER
TURBO • AUTOMATIC
Avatar
KIRA MORRISON
  • MEMBER
  • 1 POST
I bought the vehicle listed above turbo diesel. I had an intermittent starting problem I got told to replace the ignition barrel. so I replaced that then got told that the TCM chip was fried. so I replaced that and now the car isn't selecting gears. I was wondering what the problem is?
Sep 18, 2015 at 3:57 AM
Advertisement
Avatar
KASEKENNY
  • CERTIFIED EXPERT
  • 18,907 POSTS
This is a couple possible issues. First and foremost we need to check the fluid level and service the transmission if the fluid is not in good condition.

https://www.2carpros.com/articles/how-to-service-an-automatic-transmission

If that does not solve the issue then we need to review this guide and start working through the issues.

https://www.2carpros.com/articles/automatic-transmission-problems

Start with checking for codes and make sure we don't have any. Here is a guide for that as well:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Let's run through this and go from there. Thanks
Dec 15, 2020 at 2:32 PM