2005 Nissan Hardbody Can't select gear

2005 NISSAN HARDBODY
120,000 MILES
Avatar
ALLEN DOG
  • MEMBER
  • 1 POST
Hi I have a 2005 Nissan hardbody 4x4 2.4 16v
I changed the clutch kit about 20 000 km ago and yesterday it just doesn't want to select a gear had a look at the master cylinder and all looked fine when I switch off the motor I can select but when it's running can't select and clutch also no resistance could this be the thrust bearing?any help will be appreciated want to find out before I take that gearbox down coz that's a hell of the mission

Thanks allen dog
Nov 16, 2013 at 10:50 PM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
If the clutch pedal does not have any resistance, that usually means a fault in the hydraulic system.

Get someone to pump the clutch pedal while you watch the slave cylinder to see how much it moves. If it has minimal or no movement, you would need to have the master cylinder checked. Try bleeding the system to see if it makes any difference.

Nov 17, 2013 at 1:17 AM