Alternator Replacement

> DRIVE BELT REMOVAL

1. Securely insert the spindle handle or ratchet handle with a 12.7 mm (1/2-inch) insertion angle into the jig hole of the auto-tensioner.

2. Rotate the auto-tensioner counterclockwise and align hole A with hole B.

3. Insert an L-shaped hexagon wrench, etc. into the hole to fix and then remove the drive belt.

CAUTION:
To reuse the drive belt, draw an arrow indicating the rotating direction (clockwise) on the back of the belt using chalk, etc.

Hello,

Here is a guide that will walk you though the steps with diagrams below to show you on your car.

https://www.2carpros.com/articles/how-to-replace-an-alternator

You should check the alternator once you are done with the job to make sure it is working correctly.

https://www.2carpros.com/articles/how-to-check-a-car-alternator

Here is how to do the job on your car (below).

Need to know how to remove and install an alternator.

how do you get the altanator from the back of the motor so you can change it? i have it loose but ii cant get it out from under the car.

the engine has to be jacked up to get it out you may have to loosen engine mounts.