I have a 2005 PT Crusier Touring edition 2.4 liter,
It starts only with starting fluid but shuts off after it has used all that I sprayed. So I narrowed the problem to no fuel being sent to the motor. I have replaced the fuel pump relay and a 20amp fuse FP/ASD in the engine compartment. I have also replaced #11 fuse in the fuse panel in the inside drivers side.
Is there any other component I should check before I take the fuel pump out?
It starts only with starting fluid but shuts off after it has used all that I sprayed. So I narrowed the problem to no fuel being sent to the motor. I have replaced the fuel pump relay and a 20amp fuse FP/ASD in the engine compartment. I have also replaced #11 fuse in the fuse panel in the inside drivers side.
Is there any other component I should check before I take the fuel pump out?
Mar 10, 2013 at 8:25 PM