I cant figure out how to change the bulb in my2005 chevy equinox. Its the driver side headlamp.
Dec 27, 2010 at 9:43 PM
changing headlamp
2005 CHEVROLET EQUINOX
GRACIE10
- MEMBER
- 1 POST
- FOLLOW
Advertisement
HEADLAMP ASSEMBLY OR HEADLAMP BULB AND/OR CORNERING, SIDEMARKER, PARK, TURN SIGNAL BULB REPLACEMENT
REMOVAL PROCEDURE
Open the hood.
Remove the fascia to tie bar push-in retainers (1).
Gently pull the top of the fascia assembly several inches away from the vehicle to release the radiator grille strap from the headlamp.
Place a piece of tape over the radiator grille strap to headlamp retaining clip to prevent scratching of the headlamp lens.
Remove the headlamp bolts (1, 2).
Pull gently on the bottom outboard corner of the headlamp to disengage the lower rear headlamp retainer.
Remove the bulbs (2, 3, 4, 5) from the backside of the headlamp.
Remove the headlamp from the vehicle.
REMOVAL PROCEDURE
Open the hood.
Remove the fascia to tie bar push-in retainers (1).
Gently pull the top of the fascia assembly several inches away from the vehicle to release the radiator grille strap from the headlamp.
Place a piece of tape over the radiator grille strap to headlamp retaining clip to prevent scratching of the headlamp lens.
Remove the headlamp bolts (1, 2).
Pull gently on the bottom outboard corner of the headlamp to disengage the lower rear headlamp retainer.
Remove the bulbs (2, 3, 4, 5) from the backside of the headlamp.
Remove the headlamp from the vehicle.
Images (Click to enlarge)
Dec 27, 2010 at 10:18 PM