Can't remove wheel from wheel hub

2005 CADILLAC CTS
6 CYL • 2WD • AUTOMATIC
Avatar
RICKYSH11
  • MEMBER
  • 75 POSTS
I had a flat tire and a lug nut that was stuck on the lug which was stripped when attempted to remove. The nut was then chiseled in the second attempt to remove it. The only other thing that came to mind was by way of torching it but the shops I've contacted have refused to do this. Are there any other options to remove the wheel? It's a custom wheel I don't mind any damage to the wheel as I need for it come off to put a spare on the car....
Aug 27, 2012 at 2:47 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
I would rock the lug nut with an impact gun tightening and loosening it till it breaks.
Aug 27, 2012 at 4:09 PM
Avatar
RICKYSH11
  • MEMBER
  • 75 POSTS
At this point a power tool won't work the nut is disfigured from the chiseling
Aug 27, 2012 at 4:14 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Do you have an air compressor?
Aug 27, 2012 at 4:16 PM
Avatar
RICKYSH11
  • MEMBER
  • 75 POSTS
Yes
Aug 27, 2012 at 4:17 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
If you don't care about the wheel you could always use an air chisel.
Aug 27, 2012 at 4:36 PM
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
they have sockets that go on these nuts and use them to remove it.try snap on,mac,matco,maybe craftsmen.umay need a torch also to got it hot.gl
Aug 28, 2012 at 4:09 AM