Vin #1G8AZ52F44Z226465. I can hear the noise when turning Thank you so much for your help
Oct 10, 2011 at 2:13 AM
Advertisement
RIVERMIKERAT
CERTIFIED EXPERT
6,110 POSTS
When moving the steering wheel? Or when the steering wheel is turned and you are moving? If when turning the steering wheel, it is most likely a problem in the steering rack. If while the car is moving, it is most likely a CV Joint.
Oct 10, 2011 at 2:16 AM
TROY31
MEMBER
9 POSTS
Yes, while moving forward and moving the wheel back and forth
Oct 10, 2011 at 2:30 AM
Advertisement
RIVERMIKERAT
CERTIFIED EXPERT
6,110 POSTS
See if you hear the noise while sitting still and moving the steering back and forth.
Oct 10, 2011 at 2:50 AM
TROY31
MEMBER
9 POSTS
I don't hear it unless I'm moving
Oct 10, 2011 at 2:53 AM
RIVERMIKERAT
CERTIFIED EXPERT
6,110 POSTS
Bad CV joint. Look for the ripped one on the side you hear the noise from.
Oct 10, 2011 at 3:05 AM
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
I would replace the sway bushings your car doesnt require you to replace the brackets its a late enough vin.
Oct 10, 2011 at 3:08 AM
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
There is a bullentin for the sway bar bushings clunking i have replaced so many for clunking i have lost count.Very common on those cars.
Oct 10, 2011 at 3:10 AM
TROY31
MEMBER
9 POSTS
Thank you so much, your advice is very much appreciated. Again, thank you
Oct 10, 2011 at 3:16 AM
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
Your welcome thats what were here for keep us posted on how it goes.
Oct 10, 2011 at 3:23 AM
TROY31
MEMBER
9 POSTS
I've replaced everything else, that's all that's left. I just didn't figure it was something so simple
Oct 10, 2011 at 3:26 AM
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
The first one i had to figure out before saturn told us what it was it was fun to figure out.I didnt end up replacing all the stuff you did i just removed the sway bar links and took it for a drive around the parking lot and the noise was gone.There was no play in the sway bar links so i knew it was the sway bar bushings.
Oct 10, 2011 at 3:35 AM
TROY31
MEMBER
9 POSTS
I should have thought of that. I'll try it tomorrow