OBD problem not rectified by dealer - P0702

2004 JEEP GRAND CHEROKEE
137,000 MILES
Avatar
SAFCBOBBYB
  • MEMBER
  • 1 POST
Jeep Grand Cherokee 2.7 Diesel 2004
OBD Warning light showing code P0702 - Put it into Chrysler main dealer today - reported as follows:
Engine management light on - carried out diagnostic checks-
Fault codes stored P1130 Fuel Rail Pressure malfunction
cmp circuit p0340, t/case position sensor p0336,
.t/cpntrol p0702
'cleaned up all connections on multi-plug & control unit -
light has come back & will require further investigation'

mileage 137000 - only got this 3 weeks ago and had a full service done today but now warning light on continuously - no apparent loss of power or performance - any ideas ?
Jun 25, 2012 at 8:18 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
code numbers never identify bad parts just failed systems.

you need someone with good diag skills, that can track each code down one at a time.

the 702 is a general trans failure code.

340 is a cam sensor code

1136 is a transfer case position sensor issue.

the fuel rail sensor code may be just that sensor. i have done a few and most of the time, it is the sensor.

dont go throwing any parts at it as most of the time guesses are expensive and mostly wrong.

i would start with the trans code as it is the most vague and may end up with re building the trans.

Roy
Jun 25, 2012 at 11:21 PM