i would like to now how to change an o/s/r taillight
Jan 6, 2011 at 12:02 PM
change taillight bulb
2004 HONDA ACCORD
MARTIN523
- MEMBER
- 1 POST
- FOLLOW
Advertisement
TAILLIGHT (4-DOOR)
1. Remove the rear bumper.
2. Open the trunk lid and remove the trunk side trim panel.
3. Disconnect the connectors (A) from the taillights (B).
Brake/Taillight : 21/5 W
4. Remove the mounting nuts and screws, then remove the taillight.
5. Install the taillight in the reverse order of removal and tighten the nuts to 5 N.m (0.5 kgf.m, 4 ldf.ft).
6. After installing the taillight, run water over it to make sure it does not leak.
© 2008 Mitchell Repair Information Co., LLC.
1. Remove the rear bumper.
2. Open the trunk lid and remove the trunk side trim panel.
3. Disconnect the connectors (A) from the taillights (B).
Brake/Taillight : 21/5 W
4. Remove the mounting nuts and screws, then remove the taillight.
5. Install the taillight in the reverse order of removal and tighten the nuts to 5 N.m (0.5 kgf.m, 4 ldf.ft).
6. After installing the taillight, run water over it to make sure it does not leak.
© 2008 Mitchell Repair Information Co., LLC.
Image (Click to enlarge)
May 17, 2021 at 12:16 PM