2004 Ford Escape brake lights

2004 FORD ESCAPE
130,000 MILES • 2.0L • 4 CYL • 2WD • MANUAL
Avatar
PLOPEZCC
  • MEMBER
  • 6 POSTS
Bottom Brake lights not working, third brake light is working, have checked fuse, all good. Changed the brake light switch, didn't fix the problem. What else could it be?
Sep 21, 2014 at 4:42 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Have you checked to see if your missing power or ground to those brake lights that are inop?
Sep 21, 2014 at 5:41 PM
Avatar
PLOPEZCC
  • MEMBER
  • 6 POSTS
No, how would I go about doing that?
Sep 21, 2014 at 5:45 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
You would need a multi meter do you have one of those?
Sep 21, 2014 at 5:47 PM
Avatar
PLOPEZCC
  • MEMBER
  • 6 POSTS
No, have been using a test light.
Sep 21, 2014 at 5:53 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
So do you have power to the brake light bulbs while stepping on the brakes? Its a little hard to check the ground with a basic test light.
Sep 21, 2014 at 6:01 PM
Avatar
PLOPEZCC
  • MEMBER
  • 6 POSTS
Yes, it has power coming in.
Sep 21, 2014 at 6:04 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Then you need to check the ground to the brake bulb get a multi meter and we can check it.
Sep 21, 2014 at 6:08 PM
Avatar
PLOPEZCC
  • MEMBER
  • 6 POSTS
OK. I will pick one up tomorrow.
Sep 21, 2014 at 6:10 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Sounds good they usually put the ground in the rear bumper area.
Sep 21, 2014 at 6:17 PM
Avatar
PLOPEZCC
  • MEMBER
  • 6 POSTS
Found the problem, was tow wiring hooked into the lights. Thanks for your help saturntech9, lead me down the path to finding it.
Sep 22, 2014 at 4:55 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Your welcome glad you found the problem thats what we like to hear.
Sep 22, 2014 at 9:13 PM