ABS wheel sensor

You need to have the front brakes inspected to find out why its clunking-Was the clunking there prior to the sensor change?

Yes it was

I sounds like you have a strut or ball joint that needs inspection/replacement.

Strut and ball joints all checked could it be the abs pump

There must be a problem with the reluctor on one of the wheels, and the sensor is not picking it up, the ABS keeps activating because it thinks a wheel is stopped while the others are rolling. Did you have the brakes done? did this start after the sensor?

All been checked wheel brakes cap between sensor all been cleaned garage saying could be abs pump his sed done all he can as like i sed check all things posible

So, the noise you hear/feel, is it on the brake pedal, like the ABS is activating?

Yes it makes clunking sound when applying brakes and car is coming to a stop .

Can we disconnect the ABS module wiring temporally to see if the problem stops?

Yes abs now been disconnected problem is parking light on now due back in garage Monday help plzzzzzz

The noise is gone?

Yes noise has gone but no abs been disconnected

So the abs is hooked up and the noise is now gone? is there still a problem?

No abs is NOT connected and I don't have noise but parking light now on

Okay, sorry for the 100 questions, sometimes its difficult to diagnose problems over the internet, I wish I could just crawl through the computer and help you :-) anyway, You will need to test the voltage output at the wheel sensor, connect the voltage gauge to the sensor while its disconnected, set the meter to ac voltage and spin the wheel, each sensor should have voltage, if they do, the ABS module is bad and needs replacing.

Let me know what you find

Best, Ken