High sensor voltage for switch time calculation problem

2004 CHEVROLET OPTRA
72,500 MILES
Avatar
YOGESHKOSHTI
  • MEMBER
  • 3 POSTS
Hello,

I have fitted CNG kit in my petrol Chevrolet Optra car 7 months back.
Recently the Engine check light was turned on and it goes off by itself and again on.
I tried to diagnose the issue and the error shows:


TID:$04 CID:$60

High sensor Voltage for switch time calculation

I am not sure what does it mean.
It was also showing warning as:

Camshaft position sensor low signal

Could you please explain me its details, causes, symptoms and how to troubleshoot this problem.

Details of test:
Mode $06 report generated by Torque for Android
================================================
Vehicle VIN: KLANF196T5H313753
Vehicle Manufacturer: Daewoo
Vehicle Calibration ID: 74742300
Unit and scaling information are not supplied with the data from the ECU for this type of vehicle. Consulting the manufacturers service book for this information is recommended.
Test report:
------------------
TID:$04 CID:$60
- High sensor Voltage for switch time calculation
Max: 0
Test result value: 192
FAIL
----
TID:$07 CID:$4d
- Minimum sensor Voltage for test cycle(calculated)
Test incomplete or dependant test failed
--
TID:$0a CID:$03
- Sensor period(calculated)
Test incomplete or dependant test failed
--
TID:$0a CID:$05
- Sensor period(calculated)
Test incomplete or dependant test failed
--
TID:$0a CID:$06
- Sensor period(calculated)
Test incomplete or dependant test failed
--
TID:$0a CID:$42
- Sensor period(calculated)
Max: 32,768
Test result value: 32,768
PASS
----
TID:$0a CID:$48
- Sensor period(calculated)
Max: 32,768
Test result value: 32,768
PASS
----
End of report.



Thanks in Advance!

Best Regards,
Yogesh
Jul 24, 2012 at 6:26 AM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Hey YOGESHKOSHTI,

Yes this code is telling you that the ICM has gone out here are diagrams and instruction on how to change it out. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Image (Click to enlarge)
Attached Media
Dec 14, 2016 at 6:55 PM
Avatar
MARCO ANDREIA PARREIRA
  • MEMBER
  • 2 POSTS
Hello. Sorry to come here but i have a problem in my car and i have Change a lot of parts in the car but still there the code. Please someone help me please.
Car Ford f150 5.4L Supercharger 2002.
Error code p0171 bank 1.
Thanks a lot.
Mode $06 report generated by Torque for Android
===============================================

Unit and scaling information are not supplied with the data from the ECU for this type of vehicle. Consulting the manufacturers service book for this information is recommended.

Test report:
------------------
TID:$01 CID:$11
- Rich to Lean sensor threshold voltage(constant)
Min: 512
Test result value: 1 024
PASS
----
TID:$01 CID:$21
- Rich to Lean sensor threshold voltage(constant)
Min: 512
Test result value: 1 024
PASS
----
TID:$03 CID:$01
- Low sensor Voltage for switch time calculation
Min: 0
Test result value: 461
PASS
----
TID:$03 CID:$02
- Low sensor Voltage for switch time calculation
Min: 0
Test result value: 563
PASS
----
TID:$04 CID:$11
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
----
TID:$04 CID:$12
- High sensor Voltage for switch time calculation
Max: 768 Min: 115
Test result value: 0
FAIL
----
TID:$04 CID:$21
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
----
TID:$04 CID:$22
- High sensor Voltage for switch time calculation
Max: 768 Min: 115
Test result :0
FAIL

----
TID:$04 CID:$11
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
----
TID:$04 CID:$12
- High sensor Voltage for switch time calculation
Max: 768 Min: 115
Test result value: 0
FAIL
----
TID:$04 CID:$21
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
----
TID:$04 CID:$22
- High sensor Voltage for switch time calculation
Max: 768 Min: 115
Test result value: 0
FAIL
----
TID:$01 CID:$11
- Rich to Lean sensor threshold voltage(constant)
Min: 512
Test result value: 1 024
PASS
----
TID:$01 CID:$21
- Rich to Lean sensor threshold voltage(constant)
Min: 512
Test result value: 1 024
PASS
----
TID:$03 CID:$01
- Low sensor Voltage for switch time calculation
Min: 0
Test result value: 461
PASS
----
TID:$03 CID:$02
- Low sensor Voltage for switch time calculation
Min: 0
Test result value: 563
PASS
----
TID:$04 CID:$11
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
----
TID:$04 CID:$12
- High sensor Voltage for switch time calculation
Max: 768 Min: 115
Test result value: 0
FAIL
----
TID:$04 CID:$21
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
----
TID:$04 CID:$22
- High sensor Voltage for switch time calculation
Max: 768 Min: 115
Test result v
----
TID:$04 CID:$11
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
----
TID:$04 CID:$12
- High sensor Voltage for switch time calculation
Max: 768 Min: 115
Test result value: 0
FAIL
----
TID:$04 CID:$21
- High sensor Voltage for switch time calculation
Max: 768 Min: 77
Test result value: 0
FAIL
--
Jan 14, 2020 at 12:53 PM
Advertisement
Avatar
MASTERWRENCH
  • CERTIFIED EXPERT
  • 258 POSTS
Marco,

Please start a new thread to ask your question. Follow the link below:

https://www.2carpros.com/questions/new

Thanks!
Jan 18, 2020 at 1:37 PM