my 04 seville had several codes.

2004 CADILLAC SLS
88,000 MILES
Avatar
RJOTWINS
  • MEMBER
  • 1 POST
I've fixed several of the codes. I had a new tune up , o2 sensors, grumet. I still have p300 code and my car bogs down alot, plus it shakes at 500 rpms. It cuts off at times and I have to put it in neautral. My mechanic says I need crankshaft sensors. So what can I do?
Nov 14, 2011 at 10:44 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
A PO300 is a random misfire. Many things can cause it. Start easy.. check for vacuum leaks, and check fuel pump pressure to make sure it is within spec.
Nov 14, 2011 at 11:25 PM
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
if you have the engine scoped they will tell what cylinder is causing the misfire.it may be a bad plug or wire.
Nov 15, 2011 at 3:48 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
https://www.2carpros.com/articles/engine-misfires-or-runs-rough

1.Defective spark plugs

2.Inadequate spark/coil,defective spark plug wire.

3.Lack of compression

4.False air leakage.

5.Faulty fuel injectors.

6.Insufficient fuel pressure.

7.Contaminated fuel.

8.EGR valve that is leaking.

9.Oxygen sensors.

10.Throttle position sensor.

11.Manifold absolute pressure sensor

12.Mass Airflow Sensor

13.Idle air control valve

Note: If it doesn't apply disregard it-
Nov 15, 2011 at 3:55 PM