2003 Toyota Tacoma Air

2003 TOYOTA TACOMA
AUTOMATIC
Avatar
THOMAS R
  • MEMBER
  • 1 POST
"I have a 2003 Tacoma and the air was cooling but not cold, so I added a little Freon and it may have been a little to much. The air worked until next day and then it blew the 10 amp fuse. I released some gas out of it and got it where it should be but it still blowing fuse. I put a 20 amp fuse in it and it works fine. Where should I begin to look
Jun 26, 2015 at 4:38 PM
Advertisement
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
FIRST OFF

I'D LOOK TO SEE IF I HAD SOMETHING TO TAKE THE BATTERY LOOSE QUICKLY AND A FIRE EXTINGUISHER (I LIKE 5 POUNDERS)

ONCE A WIRING HARNESS GETS FULLY INVOLVED FROM THE ONE RED HOT WIRE CONNECTED TO THE 20 AMP FUSE, YOU'LL HAVE TO WORK FAST!. TAKE THE BATTERY LOOSE FIRST, AS WHEN THE OTHER WIRES START TOUCHING EACH OTHER, EVERYTHING WILL EXPONENTIALLY BEGIN TO MELT DOWN. THEN TAKE CARE OF THE FIRE, IF IT'S NOT TOO LATE!

SECONDLY, THERE ARE FELLERS OUT THERE WHO KNOW HOW TO FIX THESE THINGS CORRECTLY, AND THEY HAVE THE CORRECT EXPENSIVE TOOLING NECESSARY FOR THE JOB.

STOP IN A POPULAR AUTO PARTS STORE, ASK TO SPEAK TO THE COMMERCIAL PARTS MANAGER. (BEFORE 5 PM) . HE'S DELIVERED PARTS TO 'EM AND HAS SEEN THE WAY THEY OPERATE AND ACT. HE WILL KNOW OF A DECENT, INEXPENSIVE SHOP, THAT DOES QUALITY WORK (ASK HIM IF HE WOULD USE THEM)

THE MEDIC
Image (Click to enlarge)
Attached Media
Jun 26, 2015 at 4:53 PM