will not start after changing oil pan very low clearance

2003 SATURN SEDAN
120 MILES
Avatar
DANIELDELOSSANTOS
  • MEMBER
  • 7 POSTS
my daughter has a2003 Saturn ion 2.2 she hit a curve and made hole in oil an so installed new an it drove about 5 miles then motor died and wont start again. i did feel a stutter feeling on steering wheel before it quit running what could be the problem stumped
Sep 18, 2012 at 5:50 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
So will the engine turn over freely with the starter?
Sep 18, 2012 at 5:56 PM
Avatar
DANIELDELOSSANTOS
  • MEMBER
  • 7 POSTS
yes the engine starter turns but willnot crank over
Sep 18, 2012 at 6:25 PM
Advertisement
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
WHAT HE MEANS IS:

WILL THE ENGINE'S CRANKSHAFT DO REVOLUTIONS WHEN YOU TURN THE KEY TO START?

.....DOES IT NOT DO ANYTHING AT ALL?

OR DOES IT DO REVOLUTIONS, BUT JUST WON'T "BUST OFF" AND RUN?

I THINK THE "OVERALL" QUESTION IS.....IS THIS PUPPY LOCKED UP FROM LACK OF OIL? THE WORST DAMAGE MAYBE WAS DONE PRIOR TO THE NEW PAN.

ALL YOURS SATURNTECH9

THE MEDIC
Sep 18, 2012 at 6:47 PM
Avatar
DANIELDELOSSANTOS
  • MEMBER
  • 7 POSTS
will turn revolutions wont bust off and run. allmost acts like low battery but battery is new
Sep 18, 2012 at 7:35 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
So it sounds like its turning over slower then usual or faster then usual?
Sep 18, 2012 at 7:49 PM
Avatar
DANIELDELOSSANTOS
  • MEMBER
  • 7 POSTS
slower its like the battery dosent have the power to turn the crankover fast enought.
Sep 18, 2012 at 7:53 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
So was the engine ran without oil when the oil pan was struck?
Sep 18, 2012 at 8:27 PM
Avatar
DANIELDELOSSANTOS
  • MEMBER
  • 7 POSTS
she told me about 5 miles she smelt oil and pulled over from the place it happed to were she stopped is 5to6 miles tops the next day when i worked on thecar there was no smell of burnt oil.she new when it happen soo she was aware she pulled off rd and called methe hole was about 1" long 1/4" wide.
Sep 18, 2012 at 8:41 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
I would remove the spark plugs and see if the engine turns over freely while you turn the crankshaft pulley clockwise.
Sep 18, 2012 at 9:01 PM
Avatar
DANIELDELOSSANTOS
  • MEMBER
  • 7 POSTS
ok ill try that, so if it dose turn freely then what and if it doesnt what would i expect to need to do ?
Sep 18, 2012 at 9:24 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
The hard to turn by hand would explain the slower then usual engine cranking while trying to start it.
Sep 18, 2012 at 10:00 PM
Avatar
DANIELDELOSSANTOS
  • MEMBER
  • 7 POSTS
thank you for your help.
Sep 18, 2012 at 10:07 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Your welcome keep me posted.
Sep 18, 2012 at 10:29 PM