How would you replace the panhard rod given this problem?

2003 RENAULT SCENIC
107,000 MILES
Avatar
ANDYWAKE
  • MEMBER
  • 3 POSTS
Dear Expert,

Fitting a panhard rod on Renault Megan Scenic 2003.
The two fixing bolts and nuts are rusted and are spinning when trying to loosen.
How would you replace the panhard rod given this problem?

Andy
Oct 13, 2012 at 11:10 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Get new bolts. Grind off the bad bolt/nut to enable you to remove the rod.
Oct 13, 2012 at 11:18 AM
Avatar
ANDYWAKE
  • MEMBER
  • 3 POSTS
Once the bad bolt has been ground off at the nut end and the panhard rod has been dropped - is the old bolt easily removed without dismantling any more of the vehicle?
Oct 13, 2012 at 11:24 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Unless you don't have sufficient clearance/space to work, otherwise there is nothing much you need to remove.
Oct 13, 2012 at 11:30 AM
Avatar
ANDYWAKE
  • MEMBER
  • 3 POSTS
Thank you
Oct 13, 2012 at 11:33 AM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
You're welcome.

Have a nice day.
Oct 13, 2012 at 11:40 AM