torque specifications for the header bolts

2003 MITSUBISHI LANCER
500,000 MILES
Avatar
LIVIDMIKE
  • MEMBER
  • 16 POSTS
What are the torque specifications for the header bolts and the bolts for the shocks on my 2003 Mitsubishi lancer es? Just wondering what the tourque specs for the bolts on my headers and shocks are for my 2003 lancer es
Feb 11, 2012 at 12:19 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
ifyou are talkingabout your struts, it's 167NM +-9 for the large nut on top and the lower arm ball joint nut is 108NM +-10 or in english it's 123+-7 and 80+- 7 ft lbs. respectively.if you are talking about headers on the engine or exaust manifolds if it's a M10 bolt 21ft lbs +- 3 and a M8 bolt 13+-1ft lb.
Feb 11, 2012 at 1:16 AM
Avatar
LIVIDMIKE
  • MEMBER
  • 16 POSTS
Yeah I am actually putting on lowering springs and wanted to make sure I tighten all the bolts correctly when I put them back on. Is there a certain sequence I should put the header bolts back on in?
Feb 11, 2012 at 1:21 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
no doesnt' say anything about that, but i would start in middle and go outward.i fyou thi s has a turbo don't be surprised fi the exaust may be warped due to the heat from the turbo. if it is you migh tthink about a replacement.
Feb 11, 2012 at 1:24 AM
Avatar
LIVIDMIKE
  • MEMBER
  • 16 POSTS
Not a turbo so sounds like I will be fine. Thanks man, you guys are always a huge help for me
Feb 11, 2012 at 1:27 AM