2003 HUMMER H2
4,500 MILES
Avatar
EVA_ADAZA
  • MEMBER
  • 1 POST
I got a p0101 on my scantool. Engine rpm is too high. At cold start it reaches 1500 rpm and in a few minutes will rev high to 2500-3000 rpm and it stays there. I replaced the air filter, MAF sensor and the MAP sensor but still didn't fixed the problem. I also used BG air induction cleaner on the throttle body but still didn't solve the problem. Replaced also the spark plugs and did a change oil. Need help. thanks
Jan 23, 2013 at 3:09 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
I would first check for vacuum leaks with the syptoms you have with that high idle.A vacuum leak can cause a high idle and skew the map reading and set that code.Also make sure the air inlet tube isnt leaking.
Jan 23, 2013 at 5:36 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Also pull the vacuum line off the fuel pressure regulator and see if its leaking fuel into the vacuum line?
Jan 23, 2013 at 6:01 PM
Advertisement