replament of the spark plug seals

2003 HONDA CRV
83,000 MILES
Avatar
2002CRV
  • MEMBER
  • 17 POSTS
I tried to replace the spark plug seals on my 2003 CRV and found them extremely hard to remove. Do i need a special tool to remove? Any help would be appreciated.

Thank you
Jun 7, 2012 at 12:57 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
do you mean the valve cover oil seals or the boots on the plugs??
Roy
Jun 7, 2012 at 1:02 AM
Avatar
2002CRV
  • MEMBER
  • 17 POSTS
yes the valve cover oil seals.
Jun 7, 2012 at 1:13 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
valve cover has to be removed to replace the seals.

Roy
Jun 7, 2012 at 1:16 AM
Avatar
2002CRV
  • MEMBER
  • 17 POSTS
I looked up the part and Honda calls it the SEAL, SPARK PLUG TUBE.

Removing the valve cover and its seal is easy. Please look at the image that I attached. Its illustration #4.

Thank you
Image (Click to enlarge)
Attached Media
Jun 7, 2012 at 2:38 AM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
You need to punch them out. They tend to stick over time and you must be careful while punching them, avoid damaging the seats/housing. I self-fabricate a slightly " L " tipped bar to tap them.

Note the direction of the seals and do not install them reversely, it would result in difficulty in installing the valve cover over the spark plug tubes.



Jun 7, 2012 at 2:04 PM