I'm replacing the bushings in the pedal bracket

My info says remove negative battery cable-- remove electrical connector from switch, the spread switch apart to remove.

Thank you. I will try that. Will it go back they same way since it's spring loaded?

Hopefully, I can't see much from here. What I posted was from the database.

can you post a photo on how the bushing, wire, and brake rod go back on the pedal arm?

Sorry, the picture below is all I found, so far.

That's for the clutch. I need the brake. I for got how it went back together

These are pics of it apart

This is for the brake pedal switch. below

2

how does it go together

Thank you. The cpp switch did come off like you said, and went back on.

I got it back together. I found that my problem was I need to replace the pedal assembly bracket. Is there a step by step procedure on how to do that? I know it's real tight and everything is in the way.

Don't have a step by step or I haven't found one. Looks like two bolts and four nuts. You have to support the brake master cylinder and booster, before removing.

I already had those bolts and nuts out, but could'nt get the bracket out. Real tight. I did'nt know if i had to remove anything else.

Thank you for everything. It really helped. Please let me know if you find anything.

I will, can you tell if the assembly is hitting anything under the dash. My biggest problem is I can't see anything from here.

It's hitting something towards the front of the dash. I think if the clutch push rod and brake rod was not there I might be able to get it out.