Turn signals not working

2003 CHRYSLER TOWN AND COUNTRY
40,000 MILES
Avatar
MSTRANDBERG
  • MEMBER
  • 2 POSTS
I have a 2003 chrysler town and country. When you activate the turn siganls and the hazards they work on the instrument panal and not on the exterior of the viehicle. I have checked all of the fuses and the relays and the bulds. All of the rest of the lighting on the car works. what direction should i go with this?
Sep 10, 2011 at 4:43 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
At this point, since you have done all the general checks, you need to start tracing wiring to see where power is lost. I would start at the multi-function switch on the steering.
Sep 10, 2011 at 5:27 PM
Avatar
MSTRANDBERG
  • MEMBER
  • 2 POSTS
Well from there the wires go from the Multifunction switch to the BCM I am asking if there is a some kind of common problem or a related item to where the dealer would plug into the BCM and manually try to make the blinkers work so I would not have to pay 100 bucks for the test. There are a considerable ammount of wires headed to the same direction and in the same wiring bundles. Any further help would be awesome.
Sep 13, 2011 at 9:17 PM
Advertisement
Avatar
RANDYLYNCH32
  • MEMBER
  • 1 POST
I know this has been posted a while ago but what ever came of it? I have the same issue
May 22, 2014 at 9:16 AM