Oil pressure sending unit

2003 CHRYSLER PT CRUISER
150,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
TWCRUISER2003
  • MEMBER
  • 1 POST
How to remove and install a new one?
Jun 8, 2015 at 7:22 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
Hello,

Here is the location of the oil pressure sensor/sender you may need to jack the car up first to access the unit. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Jun 8, 2015 at 9:43 AM
Avatar
WILLIEWOODWARD
  • MEMBER
  • 2 POSTS
I am looking to replace the oil pressure sending unit. Where is it located on this car?
Mar 4, 2019 at 5:52 PM (Merged)
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
down by the oil filter. get the new one to match up and get the correct socket for replacement

Roy
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
WILLIEWOODWARD
  • MEMBER
  • 2 POSTS
Thanks!
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
Oil pressure switch light and chime keeps coming on despite replacing switch several times. Oil and pressure are fine. How can i disconnect the chime?
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
It can't be disconnected. Have you checked wiring to the sensor?
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
JONESY1
  • MEMBER
  • 2 POSTS
Was told the oil pressure switch needed replaced, because it was causing a leak. I bought the part, but can't get to the switch.
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
FIXITMR
  • CERTIFIED EXPERT
  • 9,990 POSTS
what motor?
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
Not all parts are easy to access. You have to improvise.
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
FIXITMR
  • CERTIFIED EXPERT
  • 9,990 POSTS
have you tried going underneath to get access?
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
JONESY1
  • MEMBER
  • 2 POSTS
How do I improvise? We had the air filter and several other parts out of the engine and still couldn't get to it. We tried going from underneath and couldn't get through the small space. Any suggestions?
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
FIXITMR
  • CERTIFIED EXPERT
  • 9,990 POSTS
sometimes you have to do things by feel. if you can fit your hand thru opening and reach sender you can remove it blind as they say? good mechanics have learned to SEE with there hands! a helper is handy in those situations too.
Mar 4, 2019 at 5:52 PM (Merged)
Avatar
FIXITMR
  • CERTIFIED EXPERT
  • 9,990 POSTS
here's what 1 person had comments about the change. reach wayyyyyy down on passenger side and remove. this was on a base PT. others have said take out battery, air box, moved fuse box aside, then easy reach.
Mar 4, 2019 at 5:52 PM (Merged)