2003 Chevrolet S-10 antii lock brakes

2003 CHEVROLET S-10
120 MILES • 3.4L • V6 • 4WD • AUTOMATIC
Avatar
TALL PAUL UC
  • MEMBER
  • 45 POSTS
03 chev s-10 PICK UP 4 WHEEL DRIVE EX .REPLACED BALL JOINTS RIVETED .HAD TO REMOVE ALL BRAKES ROTORS ETC. CHECK ENGINE LIGHT COME ON WITH ANTI LOCK CODE .HAD TO REPLACE ONE ANTI LOCK SENSOR.LIGHT WENT OUTAFTER RUN AWHILE. WHEN LIGHT WENT OUT THE BRAKES STARTED MAKEING NOISE AND PEDAL JUMPS WHEN YOU BRAKE AT LOW SPEED .WITH LIGHT ON BRAKES ARE NORMAL.LIGHT OFF JUMMP AND MAKES NOISE? EVERYTHING SEEM PUT TOGETHER RIGHT.
May 10, 2014 at 12:00 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
have a pro scan for codes for abs to see what is wrong with system. when light is on abs doesn't work so it's an abs problem autoparts cant scan for these codes. system may need bleeding or you may have a valve in unit stuck
May 10, 2014 at 1:41 PM
Avatar
TALL PAUL UC
  • MEMBER
  • 45 POSTS
hmac300 tore hub back down,and left hub bearing on 03 s10 is making a lot of noise.i think I had that problem on another vehicle,giveing the bump and grind at low speed and anti locks acting up.think so? t p
May 12, 2014 at 9:00 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
if yur bearing is bad it will screw up your absreplace it if it's making noise where you can hear it.
May 12, 2014 at 9:28 AM
Avatar
TALL PAUL UC
  • MEMBER
  • 45 POSTS
hmsc300,yeah igot it ordered already. just wonted to se if you thought so. really couldn't hear it on vehicle,but turn by hand it makes noise and locks up.thanks
May 12, 2014 at 9:42 AM