throttle position sensor

why did you change it in the first place? what does it do. scan for codes and check fuelpressure first.

I changed it because the throttle position sensor was defected as the technician of the GM dealer in Lebanon told me.
While I am driving the engine suddenly turns off and the vehicle give "reduced engine power" and the traction control light turns on.
Today my scanner gave these codes:

P1779
P1795

P0036
P0056
P0141
P0161

Regards

with that many codes check for a bad battery, check condition and load test.you should really have apro look at this, it doesn't need to be a dealer, but both of your O2 sensors behind the converter aren't reading right and could be bad or a poor connection. the other two are transmission codes but cold be caused by poor running engine or a bad trans control module. but apro should look at this as he can do stuff you can't with ahome scanner tool.

Both O2 sensors are defects there is more than four years ago.

well they dont' last forever and it depends on where they were built , mileage etc. do what you wish.

I am so sorry but it seems you don't understand me.
My pb isn't with the O2 sensors because they are defected since 2008.
My pb is with the throttle body and why it doesn't live more than six months when I change it even it is the autentic bosch from the GM dealer.
I would like to know if I have a mistake in the replacement or if there is an other wrong, which defects the throttle.
Regards and sorry for disturbing.

did you ever think that because of the bad O2 sensor that it may be causing the problem? reduced engine power and traction control can be an abs unit problem which if you have ahome scanner it won't pick those codes up so have a pro scanit.

I guess finally we found the problem.
The picture do-attach is for the connector of the gear box.
Great thanks for all those helped and I am sorry for disturbing.
Regards

RANYRIZK
May I ask where is that image located in the car ??