how do i replace the brake booster on a 2002 saab 95

Yes must remove ABS unit so lines need to be removed ,pump then bracket

hey whats up changing booster is a 15min job ,no need to remove brake hyd lines from master cyl & abs unit ,just remove nuts holding master cyl & abs unit & move both forward slightly ,then remove the booster push rod clip same place from under hood not from inside vehicle ,after that remove both upper nuts for booster & u will need to go from under vehicle with a extension & 13mm socket to reach lower bolts ,after that just take booster forward & up then out ,refitting is reverse ,made sure to fit push rod clip to rod before fitting booster in place after fitting all, just press brake pedal till u hear a click sound to lock push rods together .good luck .