2002 MITSUBISHI LANCER
130,000 MILES
Avatar
BEN19
  • MEMBER
  • 13 POSTS
how am i supposed to loosen the brake pads from the discs?.. would bleeding the brakes work.. or is there something else.. because when im driving the brakes are constantly braking
Oct 19, 2012 at 2:21 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
The caliper piston could be corroded/stuck won't retract or the brake hose is collasped internally acting as a one way check valve-
Oct 19, 2012 at 2:29 AM
Avatar
BEN19
  • MEMBER
  • 13 POSTS
okay.. but would that let the brakes work half way?.. because they are braking but not with their full potential... the pedal falls about halfway then after that it begins to noticeably start stopping the car
Oct 19, 2012 at 3:03 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Try bleeding the brakes don't work-could be the master cylinder leaking internally-
Oct 19, 2012 at 8:44 AM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Seized slider bolts of the caliper would cause the problems indicated.
Oct 21, 2012 at 7:45 AM