2002 Mazda Familia ignition failure

2002 MAZDA FAMILIA
139,993 MILES • 2.0L • 4 CYL • 2WD • AUTOMATIC
Avatar
KEALPILE
  • MEMBER
  • 1 POST
what causes ingition failure?what the defference between mazda 2.0L & 1.8L engine?
i have just replaced the ignition coil but my familia still cuts when driving,but it does not vibrate/shake..wat cud be the problem nw?the engine is 16v but the coil is for 1.8L
Dec 2, 2013 at 5:07 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Are you sure the cutting is from the ignition coil?
When does it occur and are you able to restart.

As to difference, apart from the capacity, the working principles does not vary much.
Dec 2, 2013 at 5:53 AM
Avatar
TUKX
  • MEMBER
  • 9 POSTS
at first it ddnt start till a replaced the ignition coil,nw it starts without any problem..all this started after few road test.what cud be the main problem?
Dec 2, 2013 at 6:07 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
When does the stalling occurs? Under what driving conditions?
After cutting off, are you able to restart easily?
Dec 2, 2013 at 4:16 PM
Avatar
TUKX
  • MEMBER
  • 9 POSTS
I parked the car on good condition,the following morning it started shaking.I was not so hash on it, the last speed was 180km but then it did not shake.
Now I have replaced the ignition coil,its better because it doesn't turn its self off, better idle..
My main problem is when driving it starts cutting/reduces power.
Dec 4, 2013 at 5:05 AM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
You need to provide more information for me to understand the problem better. When does the cutting off occurs? Under what driving conditions?
do you have overheating or coolant losses issues?
Dec 12, 2013 at 7:43 AM